Simulation splitting test of asphalt mixture based on X-ray computer technique and finite element method

WANG Cong; GUO Nai-sheng; ZHAO Ying-hua; TAN Yi-qiu

doi:10.16411/j.cnki.issn1006-7736.2013.02.017

Journal of Dalian Maritime University >

2013 , Vol. 39 >Issue 2: 128 - 132

DOI: https://doi.org/10.16411/j.cnki.issn1006-7736.2013.02.017

Original Paper

Simulation splitting test of asphalt mixture based on X-ray computer technique and finite element method

WANG Cong ,
GUO Nai-sheng ,
ZHAO Ying-hua ,
TAN Yi-qiu

Expand

1. Institute of Road and Bridge Engineering, Dalian Maritime University, Dalian 116026, China; 2. Key Laboratory of Highway Engineering of Liaoning Province, Dalian 116026, China; 3. School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, China

Received date: 2012-12-10

Online published: 2023-05-25

Fold

Abstract

To analyze stress distribution in asphalt mixture internal structure under splitting load condition, two-dimension heterogeneous numerical models are established based on X-ray computed technique, digital image processing and finite element method to study stress distribution in different sections under the path of vertical direction and horizontal direction of asphalt mixture specimen, and internal structure stress of the heterogeneous model and homogeneous model. Comparison results show that unlike homogeneous model, the peak value of internal stress of heterogeneous model at different sections is not shown in the middle of the model, but is distributed in the central parts of the model which exhibits multi-peak value condition, moreover, it reflects mechanics behaviors of different components of asphalt mixtures. The stress distribution trend of heterogeneous models at different sections is identical on analysis path, but there are differences at the position of peak value and the maximum value of internal stress. Therefore, the selection of section has great impact on the result of the two-dimension simulation test.

Key words： road engineering; splitting test; X-ray computed technique (CT); asphalt mixture; damage; digital image

Cite this article

WANG Cong , GUO Nai-sheng , ZHAO Ying-hua , TAN Yi-qiu . Simulation splitting test of asphalt mixture based on X-ray computer technique and finite element method[J]. Journal of Dalian Maritime University, 2013 , 39(2) : 128 -132 . DOI: 10.16411/j.cnki.issn1006-7736.2013.02.017

References

［1］黄碧霞，陆阳，张华. 基于图像识别的沥青混合料有限元建模［J］. 路基工程，2007(6)：5-6. HUANG Bi-xia, LU Yang, ZHANG Hua. Finite element modeling of asphalt mixture based on image recognition technology［J］. Subgrade Engineering, 2007 (6): 5-6.(in Chinese)

［2］虞将苗，李晓军，王端宜,等. 基于计算机层析识别的沥青混合料有限元模型［J］. 长安大学学报:自然科学版，2006，26(1)：16-19. YU Jiang-miao, LI Xiao-jun, WANG Duan-yi, et al. Finite element modeling of asphalt mixture with X-ray computerized tomography processing［J］. Journal of Chang'an University：Natural Science Edition, 2006, 26(1): 16-19.（in Chinese）

［3］王端宜，吴文亮，张肖宁. 基于数字图像处理方法和有限元建模方法的沥青混合料劈裂试验数值模拟［J］. 吉林大学学报:工学版，2011，41(4)：968-973. WANG Duan-yi, WU Wen-liang, ZHANG Xiao-ning. Numerical simulation of splitting test of asphalt mixture based on DIP-FEM［J］. Journal of Jilin University: Engineering and Technology Edition, 2011, 41(4):968-973.(in Chinese)

［4］ DAI Q L. Prediction of creep stiffness of asphalt mixture with micromechanical finite element and discrete element models［J］. Journal of Engineering Mechanics, 2007, 133(2): 163-173.

［5］WANG Hai-nian, HAO Pei-wen. Numerical simulation of indirect tensile test based on the microstructure of asphalt mixture［J］. Journal of Materials in Civil Engineering, 2011, 23(1): 21-29.

［6］WANG Jiang-yang, QIAN Zhen-dong. Indirect tension test of epoxy asphalt mixture using microstructural finite-element model［J］. Journal of Southeast University, 2011, 27(1): 65-69.

［7］WANG Hai-nian, HAO Pei-wen, YOU Zhan-ping. Characterization of the viscoelastic property of asphalt mastic［J］. Pavements and Materials, 2011 (212): 115-122.

［8］LIU Yu, YOU Zhan-ping. Determining Burger’s model parameters of asphalt materials using creep-recovery testing data［J］. Pavements and Materials，2008(334)：26-36.

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References