Numerical simulation and comparison of hydrodynamic performance of puller and pusher podded propulsors

  • JIA Bao-zhu ,
  • JI Ran ,
  • WU Lei-zhen ,
  • WANG Xian-lei
Expand
  • (Marine Engineering College, Dalian Maritime University, Dalian 116026,China)

Received date: 2018-05-25

  Revised date: 2018-06-20

  Online published: 2018-06-21

Abstract

In order to study the propulsion performance of podded propulsor under direct and azimuthing conditions, the hydrodynamic performance of the puller and pusher podded propulsor under different operating conditions was compared and analyzed by using the RANS method combining standard k-ε turbulence model. The thrust coefficient and torque coefficient of the puller and pusher podded propulsor under direct and azimuthing conditions were calculated and compared with the experimental results to verify the accuracy of the numerical calculation. The comparison results between the directdrive condition propulsion characteristic curve and the thrust coefficient and the torque coefficient curve of azimuthing condition indicate that the hydrodynamic performance of the podded propulsor can be accurately predicted by the numerical calculation. According to this model, the thrust and torque coefficient, and the variation law of the axial force coefficient and the lateral force coefficient of the two thrusters with angle were calculated. Results show that the proposed hydrodynamic model can accurately predict the hydrodynamic performance of the pod propulsion under different operating conditions.

Cite this article

JIA Bao-zhu , JI Ran , WU Lei-zhen , WANG Xian-lei . Numerical simulation and comparison of hydrodynamic performance of puller and pusher podded propulsors[J]. Journal of Dalian Maritime University, 2019 , 45(1) : 11 -18 . DOI: 10.16411/j.cnki.issn1006-7736.2019.01.002

References

[1] 马骋.吊舱推进技术[M].上海:上海交通大学出版社,2007:23-25.
Ma Yi. Podded Propulsion Technology[M].Shanghai: Shanghai JiaoTong University Press, 2007:23-25.
[2] K. Ohashi,T. Hino.Numerical simulations of flows around a ship with podded propulsor[C].1stT-POD Conference,University of Newcastle,UK,2004:211-222.
[3] H. J. Heinke. Investigations about the forces and moments at podded drives[C].1st T-POD Conference,University of New-castle,UK,2004:305-321.
[4] Friesch J. Cavitation and Vibration Investigations for Podded Drives[C]. Newcastle: Proceedings of the First International Conference on Technological Advances in Podded Propuls-ion,2004:387-399.
[5] Reza Shamsi, Hassan Ghassemi Numerical investigation of yaw angle effects on propulsive characteristics of podded propulsors[J]. Ocean Engineering, 2014:76,121-135.
[6] 王展智,熊鹰,孙海涛.直航和回转工况下吊舱推进器水动力性能数值计算方法研究[J].推进技术,2016,37(03):593-600.
Wang Zhanzhi,Xiong Ying,SunHaitao.Study on the numerical calculation method of podded propulsor under direct and azimuthing conditions[J].Journal of Propulsion Tech-nology,2016,37(03):593-600.
[7] 郭春雨,杨晨俊,马宁.基于CFD的拖式吊舱推进器斜流状态下数值模拟(英文)[J].船舶力学,2009,13(06):861-872.
Guo Chunyu,Yang Chenjun,Ma Ning.CFD-based numerical simulation of a puller podded propulsor under azimuthing condition[J].journal of ship mechanics,2009,13(06):861-872.
[8]Islam, M.F., Veitch, B., Akinturk, A., Bose, N., Liu, P., Performance study of podded propulsor in static azimuthing conditions. Int. Shipbuild. Prog. 2009, 56 (3):135–157.
[9] 王福军,计算流体动力学分析[M].北京:清华大学出版社,2004:120-121.
Wang fujun,Computation Fluid Dynamics Analysis[M].bei-jing:Tsinghua University Press,2004:120-121.
[10] 张涛,杨晨俊,宋保维.基于MRF模型的对转桨敞水性能数值模拟方法探讨[J].船舶力学,2010,14(08):847-853.
Zhang Tao,Yang Chenjun,Song Baowei.Discussion on nu-merical simulation for open-water performance of contra-rotating propeller based on MRF model[J]. Journal of Ship Mechanics,2010,14(08):847-853.
Outlines

/