Application progress of carbon materials in hole transport layer of perovskite solar cells

GUO Ming-xing; SUN Jun-sheng; LIU Jia-qi

doi:10.16411/j.cnki.issn1006-7736.2019.02.017

Journal of Dalian Maritime University >

2019 , Vol. 45 >Issue 2: 123 - 128

DOI: https://doi.org/10.16411/j.cnki.issn1006-7736.2019.02.017

Application progress of carbon materials in hole transport layer of perovskite solar cells

GUO Ming-xing ,
SUN Jun-sheng ,
LIU Jia-qi

Expand

（Environmental Science and Engineering College, Dalian Maritime University, Dalian 116026, China）

Received date: 2019-01-10

Revised date: 2019-02-25

Online published: 2019-02-26

Fold

Abstract

In conventional perovskite solar cell, hole transport material is very expensive and account for a large proportion of battery cost. In order to reduce the cost of the battery, finding a cheap substitute for traditional hole transport materials has attracted extensive attention from researchers. A lot of research results show that the carbon materials should be one of the most likely replacing traditional hole transport materials at their low price, stable chemical properties, work function matching perovskite materials, good charge mobility, conductivity and hole collection ability. At the same time, the efficiency of perovskite solar cells with carbon as the hole transport layer is also increasing year by year, and there is room for further improvement. The application progress of various carbon materials in the hole transport layer of perovskite solar cells is reviewed. The limitations of existing research work are pointed out, and the future research directions are briefly described.

Key words： carbon material; perovskite solar cell; hole transport layer; application progress

Cite this article

GUO Ming-xing , SUN Jun-sheng , LIU Jia-qi . Application progress of carbon materials in hole transport layer of perovskite solar cells[J]. Journal of Dalian Maritime University, 2019 , 45(2) : 123 -128 . DOI: 10.16411/j.cnki.issn1006-7736.2019.02.017

References

[1] Saga T. Advanced in crystalline silicon solar cell technology for industrial mass production[J]. NPG Asia Materials, 2010, 2(3): 96-102.
[2] Kojima A, Teshima K, Shirai Y, et al. Organometal Halide Perovskites as Visible-light Sensitizers for Photovoltaic Cells[J]. The American Chemical Society, 2009, 131(17): 6050-6051.
[3] Kim H S, Lee C R, Im J H, et al. Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%[J]. Scientific Reports, 2012, 2: 6022-6025.
[4]https://www.nrel.gov/pv/assets/pdfs/pv-efficiency-chart. 20181221.pdf
[5] V?lker S F, Collavini S, Delgado J L. Organic Charge Carriers for Perovskite Solar Cells[J]. ChemSusChem, 2015, 8(18): 3012-3028.
[6] Hu R, Chu L, Zhang J et al. Carbon Materials for Enhancing Charge Transport in the Advancements of Perovskite Solar Cells[J]. Power Sources, 2017, 361: 259-275.
[7] Habisreutinger S N, Leijtens T, Eperon G E, et al. Carbon Nanotube/Polymer Composites as a Highly Stable Hole Collection Layer in Perovskite Solar Cells[J]. Nano Letters, 2014, 14(10): 5561-5568.
[8] Jinli Y, Braden D S, Dianyi L, et al. Investigation of CH3NH3PbI3 Degradation Rates and Mechanisms in Controlled Humidity Environments Using in Situ Techniques[J]. Acs Nano, 2015, 9(2):1955-1963.
[9] Kwon Y S, Lim J, Yun H J, et al. A Diketopyrrolopyrrole-containing Hole Transporting Conjugated Polymer for Use in Efficient Stable Organic–inorganic Hybrid Solar Cells based on a Perovskite[J]. Energy & Environmental Science, 2014, 7(4): 1454-1460.
[10] Liu J, Pathak S, Stergiopoulos T, et al. Employing PEDOT as the p?Type Charge Collection Layer in Regular Organic?Inorganic Perovskite Solar Cells[J]. Physical Chemistry Letters, 2015, 6(9): 1666-1673.
[11] Abate A, Hollman D J, Teuscher J, et al. Protic Ionic Liquids as p-dopant for Organic Hole Transporting Materials and Their Application in High Efficiency Hybrid Solar Cells[J]. The American Chemical Society, 2013, 135(36): 13538-13548.
[12] Abate A, Leijtens T, Pathak S, et al. Lithium Salts as “redox active” p-type Dopants for Organic Semiconductors and Their Impact in Solid-state Dye-sensitized Solar Cells[J]. Physical Chemistry Chemical Physics, 2013, 15(7): 2572-2579.
[13] Nguyen W H, Bailie C D, Unger E L, et al. Enhancing the Hole-conductivity of Spiro-OMeTAD without Oxygen or Lithium Salts by Using Spiro(TFSI)a in Perovskite and Dye-sensitized Solar Cells[J]. The American Chemical Society, 2014, 136(31): 10996-11001.
[14] 张晴,黄其煜. 碳材料在染料敏化太阳能电池和钙钛矿太阳能电池对电极中的应用进展[J]. 材料工程, 2018, 46(5): 56-63.
[15] Haiwei C, Xu P, Weiqing L, et al. Efficient Panchromatic Inorganic-organic Hetero Junction Solar Cells with Consecutive Charge Transport Tunnels in Hole Transport Material[J]. Chemical Communications, 2013, 49(66): 7277-7279.
[16] Habisreutinger S N, Leijtens T, Eperon G E, et al. Carbon Nanotube/Polymer Composites as a Highly Stable Hole Collection Layer in Perovskite Solar Cells[J]. Nano Letters, 2014, 14(10): 5561-5568.
[17] Cai M, Tiong V T, Hreid T, et al. An Efficient Hole Transport Material Composite based on Poly(3-hexylthiophene) and Bamboostructured Carbon Nanotubes for High Performance Perovskite Solar Cells[J]. Materials Chemistry A, 2014, 3(6): 2784-2793.
[18] Lee J Y, Menamparambath M M, Hwang J Y, et al. Hierarchically Structured Hole Transport Layers of Spiro-OMeTAD and Multiwalled Carbon Nanotubes for Perovskite Solar Cells[J]. Chemsuschem, 2015, 8(14): 2358-2362.
[19] Wang J, LI J, Xu X, et al. Enhanced Photovoltaic Performance with Carbon Nanotubes Incorporating into Hole Transport Materials for Perovskite Solar Cells[J]. Electronic Materials, 2016, 45(10): 5127-5132.
[20] Wang F, Endo M, Mouri S, et al. Highly Stable Perovskite Solar Cells with an All-carbon Hole Transport Layer[J]. Nanoscale, 2016, 8(23): 11882-11888.
[21] Wang F, Kozawa D, Miyauchi Y, et al. Considerably Improved Photovoltaic Performance of Carbon Nanotube-based Solar Cells Using Metal Oxide Layers[J]. Nature Communications, 2015, 6(1): 6305.
[22] Li R, Xiang X, Tong X, et al. Wearable Double‐Twisted Fibrous Perovskite Solar Cell[J]. Advanced Materials, 2015, 27(25): 3831-3835.
[23] Jeng J Y, Chiang Y F, Lee M H, et al. CH3NH3PbI3 Perovskite/Fullerene Planar-Heterojunction Hybrid Solar Cells[J]. Advanced Materials, 2013, 25(27): 3727-3732.
[24] Wu Z, Bai S, Xiang J, et al. Efficient Planar Heterojunction Perovskite Solar Cells Employing Graphene Oxide as Hole Conductor[J]. Nanoscale, 2014, 6(18): 10505-10510.
[25] Yan K, Wei Z, Li J, et al. High-Performance Graphene-based Hole Conductor-Free Perovskite Solar Cells: Schottky Junction Enhanced Hole Extraction and Electron Blocking[J]. Small, 2015, 11(19): 2269-2274.
[26] Cao J, Liu Y M, Jing X, et al. Well-Defined Thiolated Nanographene as Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells[J]. The American Chemical Society, 2015, 137 (34): 10914-10917.
[27] Xu T, Chen L, Guo Z, et al. Strategic Improvement of the Long-term Stability of Perovskite Materials and Perovskite Solar Cells[J]. Physical Chemistry Chemical Physics, 2016, 18(39): 27026-27050.
[28] Rong Y, Ku Z, Mei A, et al. Hole-Conductor-Free Mesoscopic TiO2/CH3NH3PbI3 Heterojunction Solar based on Anatase Nanosheets and Carbon Counter Electrodes[J]. Physical Chemistry Letters, 2014, 5(12): 2160-2164.
[29] Zhang L, Liu T, Liu L, et al. The Effect of Carbon Counter Electrode on Fully Printable Mesoscopic Perovskite Solar Cell[J]. Materials Chemistry A, 2015, 3(17): 9165-9170.
[30] Liu Z, Zhang M, Xu X, et al. p-type Mesoscopic NiO as an Active Interfacial Layer for Carbon Counter Electrodes Based Perovskite Solar Cells[J]. Dalton Transactions, 2015, 44(9): 3967-3973.
[31] Xu X, Liu Z, Zuo Z, et al. Hole Selective NiO Contact for Efficient Perovskite Solar Cells with Carbon Electrode[J]. Nano Letters, 2015, 15(4): 2402-2408.

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References