Journal of Dalian Maritime University >
2015 , Vol. 41 >Issue 1: 32 - 36
DOI: https://doi.org/10.16411/j.cnki.issn1006-7736.2015.01.007
Wavelet methodbased complicated hull surface fitting
Received date: 2014-05-21
Revised date: 2014-09-01
Online published: 2014-09-01
The wavelet method was introduced into overall hull surface fitting from a large number of data points by using twodimensional wavelet transform, and the wavelet coefficients were filtered to obtain a highly compressed wavelet reconstruction hull surface expression. The accuracy of the reconstruction hull surface can be controlled by the value of wavelet coefficients filtering threshold. Finally, an example of a square tail boat with sharp angular change illustrate the validity and reasonableness of this method.
Key words： hull surface; surface fitting; compression ratio; wavelet transform
ZHAO Yong*1 , WANG Tian-lin1 , ZOU Li2 . Wavelet methodbased complicated hull surface fitting[J]. Journal of Dalian Maritime University, 2015 , 41(1) : 32 -36 . DOI: 10.16411/j.cnki.issn1006-7736.2015.01.007
［1］张明霞,林焰,纪卓尚. 船体曲面造型研究进展［J］. 大连理工大学学报,2003,43（2）:207-212.
ZHANG Ming-xia, LIN Yan, JI Zhuo-shang. Advances of ship surface modeling［J］.Journal of Dalian University of Technology, 2003，43(2):207-212. (in Chinese)
［2］于雁云,林焰,纪卓尚. 船体曲面参数化设计新方法［J］. 中国造船,2013,54(1):21-29.
YU Yan-yun, LIN Yan, JI Zhuo-shang. A new method for parametric design of hull surface［J］.Ship Building of China, 2013,54(1):21-29. (in Chinese)
［3］王守尊. 船体曲面的数学表达［J］. 海军工程学院学报,1992(2):28-33.
WANG Shou-zun. Mathematics expression of ship hull surface［J］.Journal of Naval Academy of Enginering, 1992(2): 28-33. (in Chinese)
［4］仵大伟,林焰,纪卓尚. 船体曲面的NURBS表达与设计［J］. 大连理工大学学报,2002,42(5):569-573.
WU Da-wei, LIN Yan, JI Zhuo-shang. Ship hull surface’s NURBS representation and design［J］. Journal of Dalian University of Technology, 2001, 42(5):569-573. (in Chinese)
［5］陈家远,黎瑞程. 船体曲面组合理论和型线精光顺［J］. 广船科技,2003(2):1-4.
CHEN Jia-yuan, LI Rui-cheng. Ship surface combination theory and lines smoothness［J］. GuangChuan Technology, 2003(2):1-4. (in Chinese)
［6］吴年庆,赵耀,袁华. 船体曲面矩形块按参考线敷设法关键技术研究［J］. 工程图学学报,2010(1):150-155.
WU Nian-qing, ZHAO Yao, YUAN Hua. Key technology of laying rectangular tiles along reference line on ship hull［J］.Journal of Engineering Graphics, 2010(1):150-155. (in Chinese)
［7］刘鹏,胡铁牛. 船体线型曲面局部修改法研究［J］. 海洋工程,2012,30(4):144-148.
LIU Peng，HU Tie-niu. Study on local modification method for ship hull surface［J］.The Ocean Engineering, 2012,30(4):144-148. (in Chinese)
［8］何炜. 基于Daubechies小波的水下图像去噪方法研究［D］. 哈尔滨:哈尔滨工程大学,2006.
HE Wei. Research on underwater image denoising based Daubechies wavelet ［D］. Harbin:Harbin Engineering University, 2006. (in Chinese)
［9］仵大伟.船体曲面表达与三维船舶设计研究［D］.大连：大连理工大学，2002.
WU Da-wei. Study on representation of ship hull surface and three dimensional modeling design ［D］. Dalian：Dalian University of Technology, 2002. (in Chinese)
［10］张荣鑫.基于小波理论的船体NURBS曲线曲面光顺性研究［D］.大连：大连理工大学,2008.
ZHANG Rong-xin. Study on the faring of ship NURBS curves and surfaces based on wavelet theory ［D］. Dalian: Dalian University of Technology, 2008. (in Chinese)
［11］赵勇, 宗智, 邹文楠. 涡旋演化的小波自适应模拟［J］. 应用数学和力学,2011,32(1):33-43.
ZHAO Yong，ZONG Zhi，ZOU Wen-nan. Numerical simulation of vortex evolution based on adaptive wavelet method［J］. Applied Mathematics and Mechanics, 2011，32(1):33-43. (in Chinese)
/
| 〈 |
|
〉 |