[1]李志鹏，雷晓波，房剑锋，等. 基于ANSYS的转子支座静刚度计算方法及实验验证[J]. 科学技术与工程，2019，19（24）：398-404.
LI Z P, LEI X B, FANG J F, et al. Calculation method on static stiffness of rotor-supports based on ANSYS and experimental verification[J]. Science Technology and Engineering, 2019, 19(24): 398-404. (in Chinese)
[2]TIAN Z Y, HU Z H, TANG J Y, et al. Dynamical modeling and experimental validation for squeeze film damper in bevel gears[J]. Mechanical Systems and Signal Processing, 2023, 193: 110262.
[3]LI L, LUO Z, LIU K N, et al.Dynamic stiffness characteristics of aero-engine elastic support structure and its effects on rotor systems: mechanism and numerical and experimental studies[J]. Applied Mathematics and Mechanics, 2023, 44(2): 221-236.
[4]WANG D, ZHANG W H, WANG Z P, et al. Shape optimization of 3D curved slots and its application to the squirrel-cage elastic support design[J]. Science China Physics, Mechanics and Astronomy, 2010, 53(10): 1895-1900.
[5]李明明，王东强，陈坤旭，等. 鼠笼弹性支承结构优化设计方法[J]. 科学技术与工程，2021，21（9）：3834-3839.
LI M M, WANG D Q, CHEN K X, et al. Optimal design method of squirrel cage elastic support structure[J]. Science Technology and Engineering, 2021, 21（9）：3834-3839. (in Chinese)
[6]徐超，马芳，迟杰，等. 鼠笼弹支轴承外圈优化设计及其性能分析[J]. 轴承，2023（9）：39-43.
XU C, MA F, CHI J, et al. Optimal design and performance analysis of bearing outer rings with squirrel-cage elastic support [J]. Bearing, 2023（9）：39-43. (in Chinese)
[7]温保岗，王美令，任红军，等. 鼠笼局部断裂的刚度特性及其转子动力学特性分析[J]. 动力学与控制学报，2018，16（6）：514-519.
WENG B G, WANG M L, REN H J, et al. Siffness of squirrel-cage with local crack and dynamic characteristic of a rigid rotor system supported by cracked squirrel-cage[J]. Journal of Dynamics and Control, 2018, 16（6）： 514-519. (in Chinese)
[8]王永亮，刘旺，杨明林，等. 某航空弹性鼠笼疲劳寿命故障机理分析与试验[J]. 大连海事大学学报，2022，48（4）：102-110.
WANG Y L, LIU W, YANG M L, et al. Fatigue life failure mechanism analysis and test of an aviation elastic squirrel cage[J]. Journal of Dalian Maritime University，2022，48（4）：102-110. (in Chinese)
[9]冯国全，周柏卓. 鼠笼式弹性支承结构参数优化设计与试验[J]. 航空动力学报，2011，26（1）：199-203.
FENG G Q, ZHOU B Z. Optimization design and test investigation of squirrel cage elastic support[J]. Journal of Aerospace Power, 2011, 26（1）：199-203. (in Chinese)
[10]徐宁. 舰船燃气轮机转子支撑系统动力学特性研究[D]. 北京：中国舰船研究院，2012.
XU N. Research on the dynamics of rotor support system in marine gas turbine[D]. Beijing: China Ship Research and Development Academy, 2012. (in Chinese)
[11]彭京徽，周海仑，张明，等. 鼠笼弹性支承的刚度实验测试及计算分析[J]. 科学技术与工程，2016，16（21）：118-124.
PENG J H, ZHOU H L, ZHANG M, et al. Squirrel cage elastic support stiffness test and calculation analysis[J]. Science Technology and Engineering, 2016, 16（21）：118-124. (in Chinese)
[12]彭京徽，周海仑，张明，等. 鼠笼弹性支承的刚度计算及其影响因素[J]. 科学技术与工程，2018，18（4）：175-180.
PENG J H, ZHOU H L, ZHANG M, et al. Calculated and infiuenced factors of the squirrel cage elastic support stiffness[J]. Science Technology and Engineering, 2018, 18（4）：175-180. (in Chinese)
[13]张萍，彭春雷. 确定鼠笼式弹性支承器刚度的一种新方法[J]. 测控技术，2016，35（增刊）：96-99.
ZHANG P, PENG C L. A [J].A new method of determining stiffness of elastic support[J]. Measurement and Control Technology，35（S）：96-99. (in Chinese)
[14]时可可，张帅军，李凌霄，等. 弹性支承轴承套圈径向刚度检测方法研究[J]. 轴承，2019（4）：63-66.
SHI K K, ZHANG S J, LI L X, et al. Research on detection method for radial stiffness of elastically supported bearing rings[J]. Bearing，2019（4）： 63-66. (in Chinese)
[15]徐方程，刘占生. 鼠笼弹性支承静刚度试验研究[J]. 振动与冲击，2010，29（增刊）：53-57.
XU F C, LIU Z S. Experimental research of static stiffness for squirrel cage[J]. Journal of Vibration and Shock, 2010, 29（S）：53-57. (in Chinese)
[16]王洋洲，刘倩，丁振晓，等. 折返式鼠笼弹性支承刚度特性研究[J]. 推进技术，2017，38（9）：2078-2085.
WANG Y Z, LIU Q, DING Z X, et al. Study on stiffness characteristics for folded squirrel cage elastic support[J]. Journal of Propulsion Technology, 2017, 38（9）： 2078-2085. (in Chinese)
[17]付才高. 航空发动机设计手册：第19册[M]. 北京：航空工业出版社，1996：59-60.
FU C G. Aeroengine design manual: 19th album[M]. Beijing: Aviation Industry Press, 1996: 59-60. (in Chinese)