支板对燃气轮机排气蜗壳性能影响的数值研究

PDF(899 KB)

大连海事大学学报 ›› 2015, Vol. 41 ›› Issue (4) : 47-52.

热能与动力

吴宛洋,钟兢军*,陆华伟,阚晓旭

作者信息 +

Numerical investigation on effect of supported platet on he gas turbine exhaust volute performance

WU Wan-yang,ZHONG Jing-jun*,LU Hua-wei,KAN Xiao-xu

Author information +

文章历史 +

摘要

在进行燃气轮机排气蜗壳风洞实验时，为提高排气蜗壳的稳定性及安全性,通常在其进口前端引入支板来支撑壳体。通过数值仿真软件ANSYS CFX对引入支板结构前后的两种流场进行数值研究，分析不同截面总压损失系数及流线分布规律,获得两种流动特性的对比结果.结果表明,在蜗壳进口前增设支板结构对排气蜗壳气动性能无显著影响,可通过实验获得排气蜗壳相应气动性能参数.

Abstract

During the wind tunnel experiment of gas turbine exhaust volute, supported plate should be installed in the import of exhaust volute for the sake of the stability and security, numerical simulations of the flow field with and without supported plate were carried out by using the CFX software, the total pressure loss coefficient distribution and streamline distribution for the two types of flow field were compared and analyzed. Results show that there is no significant effect to the aerodynamic characteristics of the exhaust volute by using supported plate, which could help to order the aerodynamic parameter and flow characteristics of the exhaust volute.

导出引用

吴宛洋,钟兢军,陆华伟,阚晓旭. 支板对燃气轮机排气蜗壳性能影响的数值研究[J]. 大连海事大学学报. 2015, 41(4): 47-52

WU Wan-yang,ZHONG Jing-jun,LU Hua-wei,KAN Xiao-xu. Numerical investigation on effect of supported platet on he gas turbine exhaust volute performance[J]. Journal of Dalian Maritime University. 2015, 41(4): 47-52

参考文献

[1]沈逢京,崔春,陈良泽,等.小型高超声速风洞的设计研究[C]//第五届中国航空学会青年科技论坛文集(第5集),北京:中国航空学会,2012:97-101.
SHEN Feng-jing, CUI Chun, ZHEN Ze-liang,et al. Aerodynamic design and search of the small wind tunnel[C]//The Proceedings of the Fifth Aviation Chinese Society of Aeronautics and Astronautics Youth Science Forum.Beijing:Chinese Society of Aeronautics and Astronautics,2012:97-101.(in Chinese)
[2]代燚.低速风洞流场数值模拟与优化设计[D].上海:上海交通大学,2013
DAI Yi. Numerical simulation of low speed wind tunnel and CFD-based optimal design[D].Shanghai:Shanghai Jiaotong University,2013.(in Chinese)
[3]龚鹏.带中心支板测压进气道流场特性研究[J].实验流体力学,2008,22(1):31-35.
GONG Peng. Investigation on flow pattern of sidewall compression scram jet inlet with single central strut[J].Journal of Experiments in Fluid Mechanics,2008,22(1):31-35.(in Chinese)
[4]BARTH T J,JESPERSEN D C.The design and application of upwind schemes on unstructured meshes[C]//Technical Report AIAA-89-0366,AIAA 27th Aerospace Sciences Meeting,Reston,VA:AIAA,1989.
[5]吴国强.压气机排气蜗壳数值模拟[D].哈尔滨:哈尔滨工程大学,2008.
WU Guo-qiang. Numerical simulation of compressor[D]. Harbin:Harbin Engineering University,2008.(in Chinese)
[6]莫政宇.舰用燃气轮机排气蜗壳数值模拟[D].哈尔滨:哈尔滨工程大学,2002.
MO Zheng-yu. Numerical simulation of the marine gas turbine exhaust volute[D].Harbin:Harbin Engineering University,2002.(in Chinese)