焊接热效应对船舶动力学性能影响的有限元分析

陈章兰; 叶家玮

doi:10.16411/j.cnki.issn1006-7736.2013.02.025

大连海事大学学报 >

2013 , Vol. 39 >Issue 2: 53 - 56

DOI: https://doi.org/10.16411/j.cnki.issn1006-7736.2013.02.025

船舶与海洋工程

焊接热效应对船舶动力学性能影响的有限元分析

陈章兰 ,
叶家玮

展开

1. 集美大学轮机工程学院, 福建厦门361021; 2. 华南理工大学土木与交通学院, 广州 510090

陈章兰（1970 - ），女，硕士，副教授，E-mail:chenzhanglan@163.com.

收稿日期: 2012-11-06

网络出版日期: 2023-05-26

基金资助

福建省自然科学基金资助项目（2011J01326）.

收起

Influence analysis of welding thermal effect on hull dynamic performance

CHEN Zhang-lan ,
YE Jia-wei

Expand

1. Facility of Marine Engineering, Jimei University, Xiamen 361021,China;2. School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China

Received date: 2012-11-06

Online published: 2023-05-26

Fold

摘要

采用有限元方法，从理论上推导了焊接热效应对船体结构动力学性能影响的有限元分析表达式，并通过典型算例的数值模拟论证了表达式的正确性，进而验证了焊接热效应对船体结构动力学性能的影响.从焊缝区域具有初始应力与应变的本构方程出发，应用虚功原理，推导出包含焊接热效应的有限元模态分析方程.以686TEU集装箱船为例，通过在大合拢缝横剖面上施加不同水平的名义焊接残余应力，运行船体结构模态分析并提取模态数据.与无焊接热效应时模态对比，船台大合拢缝的焊接热效应改变了同节点数的1阶固有频率.理论推导和数值模拟结果对船体振动控制具有一定的参考价值.

关键词： 船舶; 焊接热效应; 动力学性能; 有限元分析

本文引用格式

陈章兰 , 叶家玮 . 焊接热效应对船舶动力学性能影响的有限元分析[J]. 大连海事大学学报, 2013 , 39(2) : 53 -56 . DOI: 10.16411/j.cnki.issn1006-7736.2013.02.025

Abstract

The influence of welding thermal effect on dynamical performance of ship structure is analyzed by FEM method and verified by typical example. Based on the formula of stress and strain, the stiffness matrix and the formula for modal analysis including welding thermal effect are developed by applying the principle of visual work. The developed equation testifies that welding thermal effect accounts for the dynamical performance of structure theoretically. Taking 686 TEU container vessel as typical example, its vibration modes with the presence of welding thermal effect or not are extracted and inhibited. The frequencies comparison of same-node and first order shows that natural frequencies would be changed with the welding thermal effect. Research result indicates that thermal effects influence on the behavior of vibration and could not be ignored if accuracy of vibration control of hull structure is deemed necessary.

Key words： ship; welding thermal effect; dynamic performance; FEM method

参考文献

［1］ADIL Y, ALAEDDIN A. Analysis of free and forced ship vibrations using finite element method［C］// ASME 2010 10th Biennial Conference. Brisbane:［s.n.］, 2010:147-156.

［2］龚君来. 某艇船体结构总振动测量及动力性能评估［J］.舰船科学技术,2008,30(3):60-63. GONG Jun-lai. A certain ship’s global vibration test trial and dynamical capability evaluation［J］. Ship Science and Technology, 2008,30(3):60-63.(in Chinese) ［3］HERSZBERG I, WITTINGHAM B, LI H C H. Vibrationbased SHM system for composite ship structures employing randon decrement signatures［C］// International SAMPE Syposium and Exhibition. Melbourne:［s.n.］,2007:10-16.

［4］程玉鑫, 周力, 洪明, 等. 舱内液体附加质量对船体振动影响的模型实验研究［J］. 中国舰船研究, 2008, 3(2):64-67. CHENG Yu-xin, ZHOU Li, HONG Ming, et al. Ship model experimental study on the effect of added masses caused by inner liquid on hull’s vibration［J］. Chinese Journal of Ship Research, 2008, 3(2):64-67.(in Chinese)

［5］李庆松, 姚辉. 柴油机推进船舶振动计算及评估研究［J］. 柴油机, 2011, 33(4):54-57. LI Qing-song, YAO Hui. Calculation and assessment on vibration of the ship with diesel propulsion［J］.Diesel Engine, 2011, 33(4):54-57.(in Chinese)

［6］CHEN Zhang-lan, XIONG Yun-feng. Research on approach of welding deformation prediction for complex structure［J］. Journal of Engineering and Technology, 2012,1(1):127-134.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献