大型商船分离型轮机仿真实验平台的设计

唐元元; 张均东; 曹  辉

doi:10.16411/j.cnki.issn1006-7736.2016.02.010

大连海事大学学报 >

2016 , Vol. 42 >Issue 2: 58 - 62

DOI: https://doi.org/10.16411/j.cnki.issn1006-7736.2016.02.010

船舶与海洋工程

大型商船分离型轮机仿真实验平台的设计

唐元元 ,
张均东 ,
曹辉

展开

（大连海事大学轮机工程学院，辽宁大连 116026）

唐元元（1990-），男，博士生.

收稿日期: 2015-09-08

修回日期: 2015-09-17

网络出版日期: 2015-09-18

基金资助

国家自然科学基金资助项目（51479017）；中央高校基本科研业务费青年骨干项目（3132015023）.

收起

Design of large merchant separated simulation & experiment platform of marine engine room

TANG Yuan-yuan ,
ZHANG Jun-dong* ,
CAO Hui

Expand

（Marine Engineering College, Dalian Maritime University, Dalian 116026，China）

Received date: 2015-09-08

Revised date: 2015-09-17

Online published: 2015-09-18

Fold

摘要

针对现有轮机仿真系统数据封闭、UI与模型耦合性强、模型利用率低的缺点，基于软件工程中的软件架构设计思想，采用UML建模、数学建模、计算机仿真、计算机通信、智能控制等理论与技术设计分离型轮机仿真实验平台.平台在机舱监测报警系统和三维虚拟机舱中得到应用.应用结果表明，仿真平台具有数据透明、数据点丰富、仿真模型可多次利用的优点.仿真平台可以在实验室环境下代替实船机舱所产生的数据，为船舶的智能化、无人化研究提供了基础实验平台.

关键词： 无人船; 智能船; 轮机仿真; 架构设计

本文引用格式

唐元元 , 张均东 , 曹辉 . 大型商船分离型轮机仿真实验平台的设计[J]. 大连海事大学学报, 2016 , 42(2) : 58 -62 . DOI: 10.16411/j.cnki.issn1006-7736.2016.02.010

Abstract

Aiming at the shortcomings of data sealing, strong coupling between UI and model and low utilization of model for existing marine engine room simulation (MERS), a separated MERS platform was designed by using UML modeling, mathematical modeling, computer simulation, computer communication and intelligent control based on the idea of software architecture design. The platform was applied in Engine Room Monitoring & Alarm System and 3D Virtual Engine Room, which shows that MERS gains the advantages of transparent data, full data point and recyclable simulation model. Data generated by real merchant engine room can be replaced by MERS in laboratory environment, which provides a basic experiment platform for the research of unmanned and intelligent ship.

Key words： unmanned ship; intelligent ship; marine engine room simulation(MERS); architecture design

参考文献

[1]CAO Hui,JIA Bao-zhu,ZHANG Jun-dong.Modeling and analysis of servo oil common rail system of marine intelligent diesel engine[J].Journal of Applied Sciences, 2013,13(22):5012-5019.
[2]陈铭治,胡以怀,王兆强. LNG船主汽轮机系统运行仿真[J].造船技术,2015(1):79-83.
CHEN Ming-zhi, HU Yi-huai,WANG Zhao-qiang.Running simulation of main steam turbine system in LNG ship simulator[J].Marine Technology,2015(1):79-83.(in Chinese)
[3]胡锦晖,胡大斌,何其伟.某型船舶动力装置建模及仿真[J].大连海事大学学报,2015,41(2):17-22.
HU Jin-hui, HU Da-bin,HE Qi-wei.Modeling and simulation of a ship’s power plant[J].Journal of Dalian Maritime University, 2015,41(2):17-22.(in Chinese)
[4]黄加亮,谢敢.基于BOOST船用柴油机热工故障仿真研究[J].舰船科学技术,2015,37(1):69-74.
HUANG Jia-liang, XIE Gan.Research on thermal fault simulation for marine diesel engine based on BOOST[J]. Ship Science and Technology,2015,37(1): 69-74.(in Chinese)
[5]GAN Hui-bing, REN Guang, ZHANG Jun-dong.A novel marine engine room monitoring and alarm system integrated simulation[C]//Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology.Piscataway, United States: IEEE Computer Society,2011:2226-2229.
[6]贾宝柱,曹辉,张均东,等.轮机模拟器及其关键技术[J]. 中国航海,2012,35(1):35-40.
JIA Bao-zhu, CAO hui, ZHANG Jun-dong,et al.Marine engine room simulator and its key technologies[J]. Navigation of China,2012,35(1):35-40.(in Chinese)
[7]CAO Hui, ZHANG Jun-dong, ZHANG Ai-ping,et al. Simulation and control of marine complex pipe network system based on distributed processing technology[C]// Proceedings of 2010 International Conference on Intelligent Control and Information Processing.Piscataway, United States:IEEE Computer Society,2010:50-53.
[8]甘辉兵,任光,张均东.基于数据挖掘的船舶机舱监控系统[J].中国造船,2011,52(4):214-221.
GAN Hui-bing,REN Guang,ZHANG Jun-dong.Monitored control system for ship engine room based on data mining[J]. Ship Building of China,2011,52(4):214-221.(in Chinese)
[9]ZHANG Zheng-quan, XU Cheng-jun. MVC model based on high-performance computing operating audit system[C]// 2010 International Conference on MultiMedia and Information Technology.Piscataway, United States:IEEE Computer Society,2010:241-243.
[10]PAN Hai-hong, JIANG Jing-jie, CHEN Lin,et al. A scalable graphics user interface architecture for CNC application based on WPF and MVVM[C]// Equipment Manufacturing Technology and Automation, Clausthal-Zellerfeld.Germany: Trans Tech Publications, 2011:1931-1935.
[11]赵飞,叶震.UDP协议与TCP协议的对比分析与可靠性改进[J].计算机技术与发展,2006,16(9):219-221.
ZHAO Fei, YE Zhen. Contrast analysis of UDP and TCP and improvement of UDP in reliability [J].Computer Technology and Development,2006,16(9):219-221.(in Chinese)

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献