船舶与海洋工程

轴承变位对舰船轴系振动特性影响计算及试验

  • 刘金林 ,
  • 蔡耀全 ,
  • 赖国军
展开
  • (海军工程大学 动力工程学院,武汉 430033)
刘金林*(1981-),博士,讲师,E-mail:jinlingo@126.com.

收稿日期: 2016-01-12

  修回日期: 2016-03-10

  网络出版日期: 2016-03-10

基金资助

湖北省自然科学基金资助项目(2014CFB453).

Calculation and experiment on influence of bearing displacement on vibration characteristic of marine shaft system

  • LIU Jin-lin ,
  • CAI Yao-quan ,
  • LAI Guo-jun
Expand
  • (College of Power Engineering,Naval University of Engineering,Wuhan 430033,China)

Received date: 2016-01-12

  Revised date: 2016-03-10

  Online published: 2016-03-10

摘要

针对轴承变位对轴系振动特性影响较大的问题,采用有限转子动力学计算轴承变位对轴系振动特性的影响规律.以某轴系试验台为研究对象,在ANSYS中建立其有限元模型,采用有限元转子动力学分别计算轴系在直线状态下和轴承变位情况下的振动特性.根据理论计算结果,在轴系试验台上分别测试轴系在直线状态下和轴承变位情况下的振动特性.试验表明:采用有限元转子动力学计算所得的轴系振动响应规律与实测值基本一致.

本文引用格式

刘金林 , 蔡耀全 , 赖国军 . 轴承变位对舰船轴系振动特性影响计算及试验[J]. 大连海事大学学报, 2016 , 42(4) : 61 -66 . DOI: 10.16411/j.cnki.issn1006-7736.2016.04.010

Abstract

Aiming at the problem that the vibration characteristic of marine shaft system was influenced greatly by bearing displacement, the finite element rotor dynamics method was proposed to calculate the influence of bearing displacement on vibration characteristic of marine shaft system. Firstly, finite element model was established in ANSYS by taking a test bench as the study object, and the vibration characteristic of shaft system in linear state and bearing displacement state was calculated respectively by using finite element rotor dynamics method. Furthermore, the vibration characteristic of shaft system test bench in linear state and bearing displacement state were measured respectively. Results show that the vibration response of both calculating and measuring coincides basically.

参考文献

[1]陈国钧,曾凡明.现代舰船轮机工程[M].长沙:国防科技大学出版社,2001:479-488.
[2]陈之炎.船舶推进轴系振动[M].上海:上海交通大学出版社,1987:172-233.
[3]周春良.船舶轴系振动研究[D].哈尔滨:哈尔滨工程大学,2006.
ZHOU Chun-liang.Vibration research on ship shafting system[D].Harbin:Harbin Engineering University,2006.(in Chinese)
[4]罗晨.水面舰船轴系-尾部结构耦合振动及水声特性研究[D].武汉:中国舰船研究院,2014.
LUO Chen. The research on characteristics of vibration and underwater radiated noise ofshaft-stern coupled system[D]. Wuhan:Chinese Ship Research & Development Acedemy, 2014.(in Chinese)
[5]MURAWSKI L.Shaft line alignment analysis taking ship construction flexibility and deformations into consideration[J].Marine Structures,2005,18(1):62-84.
[6]李经邦.航行中船舶机-轴-桨振动特性研究[D].武汉:武汉理工大学,2014.
LI Jing-bang.Research on vibration characteristics of marineengine-shaft-propeller of sailing ship[D].Wuhan: Wuhan UniversityofTechnology,2014.(in Chinese)
[7]曹贻鹏.推进轴系引起的艇体结构振动与辐射噪声控制研究[D].哈尔滨:哈尔滨工程大学,2008.
CAO Yi-peng.Study on underwater structure vibration and radiatednoisecontrolcausedby propellerexcitingforce[D]. Harbin:HarbinEngineeringUniversity, 2008.(in Chinese)
[8]郭进涛,董威.基于ANSYS的高速艇艉轴架轴系振动响应分析[J].船舶工程,2015,44(4):18-21.
GUO Jin-tao,DONG Wei. Vibration response analysis of the propeller strut and shafting of a high-speed vessel based on ANSYS[J]. Ship&Ocean Engineering, 2015,44(4):18-21.(in Chinese)
[9]谢基榕,徐利刚,沈顺根. 推进器激励船舶振动辐射声计算方法[J].船舶力学,2011,15(5):563-569.
XIE Ji-rong,XU Li-gang,SHEN Shun-gen. Calculational method for radiating sound excitedby vibration of ship propeller[J]. Journal of Ship Mechanics, 2011,15(5):563-569.(in Chinese)

文章导航

/