大连海事大学学报 >
2017 , Vol. 43 >Issue 1: 19 - 23
DOI: https://doi.org/10.16411/j.cnki.issn1006-7736.2017.01.004
变压器海上运输的紧固措施优化研究
收稿日期: 2016-09-02
修回日期: 2016-10-11
网络出版日期: 2016-10-11
Optimization of fastening measures for transformer marine transportation
Received date: 2016-09-02
Revised date: 2016-10-11
Online published: 2016-10-11
李静 , 陈健云 , 孙喆 . 变压器海上运输的紧固措施优化研究[J]. 大连海事大学学报, 2017 , 43(1) : 19 -23 . DOI: 10.16411/j.cnki.issn1006-7736.2017.01.004
In this paper, the dynamic response of large transformer in marine transportation was analyzed, and the fastening measures of pre-tightening force were studied and optimized in terms of feasible implementation process, the sliding stabilities of cushion blocks of optimized measure were verified. Results show that the distribution of tightening force after optimization is more uniform, and fastening effect is better.
［1］叶章云.重大件货物吊装及积载的计算机辅助设计研究［D］.大连:大连海事大学,2002.
YE Zhang-yun. Research on the computer assistant design of awkward and lengthy cargo’s stowage［D］.Dalian: Dalian Maritime University,2002.(in Chinese)
［2］LEENAARS C,LOUAZEL S,BRUGGHE P. Comparison of wave databases and design methods for major shipping routes［R］，2000.
［3］孙丽娜.大型构件海上运输安全性分析［D］.大连:大连理工大学,2006.
SUN Li-na. Safety analyze of large goods transport on the sea［D］. Dalian: Dalian University of Technology,2006.(in Chinese)
［4］陆从红,林焰,纪卓尚,等.超大型海洋结构物海上安全运输绑扎件设计［J］.海洋工程,2004,22(4):102-106.
LU Cong-hong, LIN Yan, JI Zhuo-shang, et al. Design of fastening structures for sea-going transportation of very-large offshore structures［J］. The Ocean Engineering, 2004, 22(4): 102-106. (in Chinese)
［5］郭尊东. 客滚船车辆的绑扎固定设备要求［J］. 中国船检, 2000（5）: 55.
GUO Zun-dong. Requirements of securing facilities for the vehicles in ro-ro passenger ship［J］. China Ship Survey, 2000（5） :55.
［6］郭静,白响恩,吴善刚.集装箱内重件货物固定方法优化［J］. 集装箱化,2014,25(4):5-7.
GUO Jing,BAI Xiang-en,WU Shan-gang.Optimization of heavy cargo securing method in containers［J］.Containerization, 2014,25(4):5-7.(in Chinese)
［7］沈江.重大件货物系固的计算方法［J］.大连海事大学学报，2008,34(增):54-56.
SHEN Jiang.Calculation method of awkward cargo’s securing［J］.Journal of Dalian Maritime University,2008,34(S):54-56.(in Chinese)
［8］谢坡岸,饶柱石,朱子述.大型变压器绕组有限元建模与分析［J］.振动与冲击,2006,25(2):134-137.
XIE Po-an,RAO Zhu-shi,ZHU Zi-shu.Finite element modeling and analysis on transformer windings［J］.Journal of Vibration and Shock,2006,25(2):134-137.(in Chinese)
/
| 〈 |
|
〉 |