叶尖小翼对高亚声速扩压叶栅气动特性影响的数值研究

吴宛洋; 钟兢军; 韩少冰

doi:10.16411/j.cnki.issn1006-7736.2017.02.015

大连海事大学学报 >

2017 , Vol. 43 >Issue 2: 97 - 102

DOI: https://doi.org/10.16411/j.cnki.issn1006-7736.2017.02.015

热能与动力

叶尖小翼对高亚声速扩压叶栅气动特性影响的数值研究

吴宛洋 ,
钟兢军 ,
韩少冰

展开

（大连海事大学轮机工程学院,辽宁大连 116026）

吴宛洋*（1990 — ），女，博士生，E-mail:wuwanyang900314@126.com.

收稿日期: 2016-12-22

修回日期: 2017-02-16

网络出版日期: 2017-02-16

基金资助

国家自然科学基金重点资助项目(51436002)；国家自然科学基金青年科学基金资助项目(51406021)；中央高校基本科研业务费专项资金资助项目(3132014319；3132016334)；辽宁省高等学校创新团队支持计划资助项目(LT2015004).

收起

Numerical simulation of blade tip winglet on the aerodynamic performance of high subsonic compressor cascade

WU Wan-yang ,
ZHONG Jing-jun ,
HAN Shao-bing

Expand

(Marine Engineering College,Dalian Maritime University,Dalian 116026,China)

Received date: 2016-12-22

Revised date: 2017-02-16

Online published: 2017-02-16

Fold

摘要

压气机正逐渐向着高负荷、高稳定性的方向发展.为有效控制该趋势下间隙区域内的流动损失加剧现象，可在高亚声速的扩压叶栅中加装叶尖小翼.本文对原型叶片及不同宽度的压力面与吸力面叶尖小翼叶片进行数值研究.结果表明:高亚声速下不同安装方案下的叶尖小翼均可以改善压气机的气动特性，削弱泄漏涡的强度，其中，压力面小翼对于流场的改善效果更为明显，与原型相比，PW2.0的总压损失系数降低了4.47 %.

关键词： 高亚声速; 扩压叶栅; 叶尖小翼; 数值模拟

本文引用格式

吴宛洋 , 钟兢军 , 韩少冰 . 叶尖小翼对高亚声速扩压叶栅气动特性影响的数值研究[J]. 大连海事大学学报, 2017 , 43(2) : 97 -102 . DOI: 10.16411/j.cnki.issn1006-7736.2017.02.015

Abstract

The compressor is developing towards high load and high stability, so in order to reduce the loss of the clearance area under this trend, the winglet could be used in the high subsonic cascade. Numerical simulation was carried out to investigate the effect of different shapes of tip winglets. Results show that an improved aerodynamic performance and a weakened tip leakage is achieved by using different winglets. The improvement effect of the pressure side winglet is more obvious, and the total pressure loss coefficient of PW2.0 is reduced by 4.47% compared with the prototype.

Key words： high subsonic; compressor cascade; blade tip winglet; numerical simulation

参考文献

［1］BINDON J P. The measurement and formation of tip clearance loss［J］.Journal of Turbomachinery,1989,111(7):257-263.

［2］SJOLANDER S A, CAO D. Measurements of the flow in an idealized turbine tip gap［J］.Journal of Turbomach-inery, 1995,117(4):578-584.

［3］吴艳辉,楚武利,卢新根.间隙区域的流动结构对压气机气动性能的影响［J］.工程热物理学报,2006,27(6):950-952.

WU Y H, CHU W L, LU X G. The effect of tip leakage flow structure on compressor aerodynamics［J］.Journal of Engineering Thermophysics,2006,27(6):950-952.(in Chinese)

［4］汪建文,贾瑞博,吴克启,等.小翼对风力机叶片压力分布的影响［J］.工程热物理学报,2006,27(5):760-762.

WANG J W,JIA R B,WU K Q, et al. Effects of a tip vane on pressure distribution of wind turbine blade［J］.Journal of Engineering Thermophysics,2006,27(5):760-762.(in Chinese)

［5］王生武,石秀华.涡轮叶尖压力边小翼肋条对泄漏流场的数值模拟［J］.计算机测量与控制,2009,17(8):1527-1530.

WANG S W,SHI X H.Numerical simulation of single pressure side winglet rim on tip leakage flow in axial turbine［J］Computer Measurement & Control,2009,17(8):1527-1530.(in Chinese)

［6］MA H W, LI B H. Effects of axial non-uniform tip clearances on aerodynamic performance of a transonic axial compressor rotors［J］.Journal of Thermal Science,2008,17(4):331-336.

［7］韩少冰,钟兢军.具有叶尖小翼的压气机叶栅间隙流动分析［J］.工程热物理学报,2012,33(9):1492-1496.

HAN S B,ZHONG J J. Blade tip clearance flow analysis of a compressor cascade with tip winglet［J］.Journal of Engineering Thermophysics,2012,33(9):1492-1496.(in Chinese)

［8］阚晓旭.矩形扩压叶栅中应用叶尖小翼的性能研究［D］.大连:大连海事大学,2012.

KAN X X. An investigation of performance by using blade tip winglet in rectangular compressor cascade［D］.Dalian:Dalian Maritime University,2012.(in Chinese)

［9］韩少冰.压气机平面叶栅加装叶尖小翼的数值研究［D］.大连:大连海事大学,2009.

HAN S B.Numerical simulation of using blade tip winglet in plane compressor cascade［D］.Dalian:Dalian Maritime University,2009.(in Chinese)

［10］钟兢军,韩吉昂,严红明,等.压气机动叶叶尖小翼: 200810010515.4［P］.2010-06-09.

［11］BARTH T J,JESPERSEN D.The design and application of upwind schemes on unstructured meshes［C］//AIAA 27th Aerospace Sciences Meeting.Reno,Nevada:AIAA,1989.

［12］INOUE M,KUROUMARU M.Structure of tip clearance flow in an isolated axial compressor rotor［J］.Journal of Turbomachinery,1989,111(3):250-256.

［13］INOUE M, KUROUMARU M,FUKUHARA M.Behavior of tip leakage flow behind and an axial compressor rotor［J］.Journal of Engineering for Gas Turbines and Power,1986,108(1):7-14,

［14］INOUE M,FURUKAWA M,SAIKI K,et al.Physical explanations of tip leakage flow field in an axial compressor rotor［C］//International Gas Turbine and Aeroengine Congress and Exhibition.［S.l.］: ASME,1998.

［15］钟兢军,高海洋,孙鹏.畸变条件下压气机静叶内部流场数值研究［J］.工程热物理学报,2013,34(7):1234-1238.

ZHONG J J, GAO H Y,SUN P. Numerical study of flow-field in compressor stator with inlet total pressure distortion［J］.Journal of Engineering Thermophysics,2013,34(7):1234-1238.(in Chinese)

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献