大连海事大学学报 >
2018 , Vol. 44 >Issue 1: 80 - 84
DOI: https://doi.org/10.16411/j.cnki.issn1006-7736.2018.01.012
特殊工况下小车架有限元分析
收稿日期: 2017-07-27
修回日期: 2017-09-25
网络出版日期: 2017-09-25
基金资助
国家自然科学基金资助项目（11202039）;中央高校基本科研业务费专项资金资助项目（3132016354;3132017027）.
Finite element analysis of trolley frame in special working conditions
Received date: 2017-07-27
Revised date: 2017-09-25
Online published: 2017-09-25
赵丁辉 , 赵杰 , 熊伟 , 孙长乐 . 特殊工况下小车架有限元分析[J]. 大连海事大学学报, 2018 , 44(1) : 80 -84 . DOI: 10.16411/j.cnki.issn1006-7736.2018.01.012
Aiming at bridge crane small frame for a special purpose based on its layout scheme and structure form, the finite element software ABAQUS was used to establish the structural model of the small frame. Through the analysis of the trolley frame under four different working conditions, the load and calculation method of the small frame structure under the most unfavorable special condition were determined, and the stress and strain nephogram of the small frame under different working conditions were obtained. The dangerous points of stress distribution and displacement in the structure were determined, which provides the basis for improving design.
[1]丁志宝，文学洙．基于ABAQUS的某车架静态结构强度的有限元分析[J]．机械工程师，2013(4)：58 – 59．
DING Zhi-bao，WEN Xue-zhu．The finite element analysis of the frame static structure strength[J]．Mechanical Engineer，2013(4)：58 – 59．(in Chinese)
[2]范开英，沈兰华．基于ANSYS Workbench的桥式起重机小车架有限元分析[J]．机械工程师，2015(4)：108 – 110．
FAN Kai-ying，SHEN Lan-hua．Finite element analysis of trolley frame in bridge crane based on ANSYS workbench[J]．Mechanical Engineer，2015(4)：108 – 110．(in Chinese)
[3]黄凯，张一辉，郑建荣．门式起重机在特殊危险工况下的安全性能分析和评价[J]．计算机辅助工程，2011，20(2)：108 – 112．
HUANG Kai，ZHANG Yi-hui，ZHENG Jian-rong．Analysis and evaluation of gantry crane safety performance under special dangerous working conditions[J]．Computer Aided Engineering，2011，20(2)：108 – 112．(in Chinese)
[4]李婷婷，王宗彦，吴淑芳，等．参数化有限元分析在模块化产品中的应用[J]．机械设计与制造，2016(1)：115 – 118．
LI Ting-ting，WANG Zong-yan，WU Shu-fang，et al．Application of parametric finite element analysis in modular product[J]．Machinery Design & Manufacture，2016(1)：115 – 118．(in Chinese)
[5]祁磊．双梁桥式起重机侧挂小车力学分析[D]．太原：太原科技大学，2011．
QI Lei．Mechanical analysis of side trolley of double beam bridge crane[D]．Taiyuan：Taiyuan University of Science and Technology，2011．(in Chinese)
[6]岳凯．ND32/5t起重机小车架轻量化设计[D]．郑州：郑州大学，2016．
YUE Kai．Lightweight design for the trolley frame of ND32/5t crane[D]．Zhengzhou：Zhengzhou University，2016．(in Chinese)
[7]黄晶晶．基于ANSYS的双梁桥式起重机小车轻量化研究[D]．太原：太原科技大学，2014．
HUANG Jing-jing．Research on lightweight of double girder overhead vehicle based on ANSYS[D]．Taiyuan：Taiyuan University of Science and Technology，2014．(in Chinese)
[8]汪东明．双梁桥式起重机小车架结构优化设计的研究[J]．轻工科技，2013(3)：54 – 55．
WANG Dong-ming．Study on optimum design of double-beam bridge crane structure[J]．Light Industry Science and Technology，2013(3)：54 – 55．(in Chinese)
[9]张翀．救助训练模拟舱结构设计及动力特性分析[D]．大连：大连海事大学，2015．
ZHANG Chong．The design of rescue simulation training cabin and study on its dynamical characteristics[D]．Dalian：Dalian Maritime University，2015．(in Chinese)
[10]金梅珍．桥式双梁起重机小车车架轻量化研究[J]．机械研究与应用，2010(5)：44 – 46．
JIN Mei-zhen．Research of weight - reduction on the frame for overhead travelling crane trolley[J]．Mechanical Research & Application，2010(5)：44 – 46．(in Chinese)
[11]全国起重机械标准化技术委员会．起重机设计规范：GB/T3811—2008[S]．北京：中国标准出版社，2008．
/
| 〈 |
|
〉 |